Moisture test before applying basecoat – Vapor from Florida slabs is the #1 cause of coating failure.
Why Moisture Testing Is Critical Before Applying an Epoxy Basecoat
If you’re a flooring professional working in South Florida, you already understand that concrete behaves differently here than it does in drier regions. What still catches many installers off guard, however, is this reality: moisture vapor rising from untested concrete slabs is the number one cause of epoxy coating failure in Florida.
At Chromology Florida East Inc., located at 10408 W State Rd 84, Davie, FL 33324, we work every day with general contractors, epoxy installers, and commercial property managers dealing with the harsh realities of Florida moisture. As a leading epoxy supplier in Davie, FL, we don’t just provide premium concrete coatings – we provide the technical knowledge required to ensure those coatings perform long after installation.
Moisture Below the Surface = Peeling on the Surface
One of the biggest misconceptions in concrete coating is assuming that a slab is dry just because it looks dry. In reality, concrete can emit significant moisture vapor long after it appears cured. When that vapor becomes trapped beneath a freshly applied epoxy basecoat, the results are often fast and destructive.
Common signs of moisture-related failure include:
- Blistering and bubbling
- Delamination and loss of bond
- Discoloration or cloudy areas
- Total coating failure within weeks
This is why every professional working within roughly 120 km of Davie – including Fort Lauderdale, Boca Raton, and Miami – should perform a moisture test before applying any primer or basecoat. Skipping this step is one of the most expensive mistakes a contractor can make.
